DeviceMaster AIR 1-Port

Product Photo for 99004-8

Part Number: 99004-8

The DeviceMaster AIR 1-Port wireless serial device server can be panel- or DIN-rail mounted. The product utilizes the 802.11b protocol for the Ethernet connection, a DB9 male serial port, and is housed in a stainless steel enclosure. It supports RS-232, RS-422, and RS-485 serial communication modes. The product is capable of executing device resident applications developed with the DeviceMaster software developer's kit, and is remotely manageable with PortVision®. An external 100-120VAC power supply is packaged with the product. The product has been tested and certified compatible with D-Link access points, and is also compatible with other 802.11b access points.

Highlights

No serial cable distance limitations — enables communication between a host PC and serial devices located anywhere across an Ethernet network
Software selectable RS-232, RS-422, or RS-485 — serial interfaces simplify setup and eliminate mechanical tampering associated with DIP switch products
Application compatibility — supports native COM, TTY, or TCP/IP Socket communication modes
Web-based configuration — makes setup and configuration changes quick and easy
Real-time e-mail event notification — alerts administrator of potential connection and security issues
Rugged stainless steel housing — enables DIN rail or panel mounting
Temperature rated for extreme conditions — operating temperature of 20° to 60°C enables DeviceMaster to function in a wide variety of harsh environments
PortVision^® enterprise monitoring and management software — automatically monitors devices on the network and enables user to view status, update firmware and resolve issues remotely
Software Developer Kit — available for users interested in writing custom applications to run on the DeviceMaster platform

DeviceMaster AIR Enables You to:

Wireless-enable any RS-232/422/485 serial device in minutes—avoiding impractical, time consuming, and costly wiring
Easily alternate between a wired or wireless network connection—enabling flexible, simplified network connectivity for devices frequently relocated
Wireless-enable existing multiport device server—leveraging your investment in existing wired device servers
Wireless-enable limited wired LAN segments—providing wireless communication to unconnected LAN segments

DeviceMaster AIR Connectivity

Wireless-enable serial devices

Wireless-enable DeviceMaster units

Ethernet-enable serial devices

Wireless-enable a network segment

System Specifications

Hardware
Bus Interface Specification	10/100 BASE-TWIRELESS
Memory
Flash	4 MB
Installation Method	Panel/DIN Rail Mountable
LED Indicators	Power and Wireless Link/Act
Dimensions	4.57" x 1.94" x 3.65"
Product Weight	15.04 oz

Electrical Specifications
Device
Current Consumption
+5VDC	1100 mA
Power Consumption (maximum)	5.5 W
Comtrol External Power Supply
Output Voltage	5VDC V
Output Current
+5VDC	420 MA (min) @ 5VDC mA
Line Voltage	90-132 VAC
ESD Surge Protection	Provides minimum of 15KV for a duration of 1ns @ 200A.

Environmental Specifications
Air temperature
System On	-20 to 60° C
System Off	-40 to 85° C
Operating Humidity (non-condensing)	5% to 95%
Altitude	0 to 10000 Feet
Heat Output	7.2 BTU/Hr
MTBF (Mean Time Between Failures)	48.4 Years

Serial Communications
Supported Standards	RS-232, RS-422, or RS-485
Baud Rate	300 to 230.4Kbps
Receive Buffer	1024 bytes
Transmit Buffer	256 bytes
Device Driver Data Control
Data Bits	7 or 8
Parity	odd, even, or none
Stop Bits	1 or 2
Flow Control	Hardware & Software

Ethernet Specifications
Network Protocols	ARP, BOOTP, HTTP, ICMP, SNMP (MIBB-II), TCP, Telnet, TFTP, UDP socket services, and WEP

WLAN Specifications
WLAN Data rates with automatic fallback	22Mbps, 11Mbps, 5.5Mbps, 2Mpbs, or 1Mbps
WLAN Port Encryption	WEP, 64-bit RC4, 128-bit RC4, or 256-bit RC4
WLAN Port Media Access Control	CSMA/CA with ACK
WLAN Port Frequency Range	2.4 GHz to 2.4385 Ghz GHz
WLAN Port Modulation Technology	Packet Binary Convolutional Coding (PBCC), Direct Sequence Spread Spectrum (DSSS), or 11-chip Barker Sequence
WLAN Port Transmitter Output	15dBm ± 2dB
WLAN Port External Antenna Type	Detachable 1.0dB gain with reverse SMA connector
WLAN Port Over-driving Levels	Tolerates up to +17dBm at the antenna
WLAN Port Operating Mode	Infrastructure
WLAN Port SSID	default
WLAN Port Channel	6
WLAN Port Transmission rates	Auto
WLAN Port Administrator Password	(no password needed)
WLAN Port IP address mode	Static

Features
SNMP Support	Monitoring only.
Manufacturer's Warranty	2 Years

Export Information
Packaged Shipping Weight	2.91 lbs
Package Dimensions	15.25" x 3" x 9.25"
UPC Code	7-56727-99004-8

Device Drivers
	Linux Microsoft^® Windows NT^® 4.0 Microsoft^® Windows Server^® 2003 Microsoft^® Windows^® 2000 Microsoft^® Windows^® XP

Regulatory Approvals
Emissions	DEVICEMASTER, AIR, 1P, DB9M, W/ 110V PS Canadian EMC requirements ICES-003: 1997 CISPR-22: 1997 European Standard EN55022: 1998 Amendment A1:2000 IEC 1000-3-2/EN61000-3-2:Harmonic IEC 1000-3-3/EN61000-3-3: Flicker FCC Part 15 Subpart B: Class A limit Canadian EMC requirements ICES-003: 1997 FCC Part 15 Subpart B: Class A limit
Safety	DEVICEMASTER, AIR, 1P, DB9M, W/ 110V PS IEC 60950/EN60950 CSA C22.2 No. 60950/UL 60950 Third Edition

Housing Dimensions

/uploads/pd/xh/pdxh0CUrK4qCw6sDzm0cMQ/DMAir_99004_8.jpg

Open Detailed Engineering Housing Drawing

Product Support and Service Information

Sales Support

Call +1.763.494.4100, or e-mail sales@comtrol.com

Technical Support

All Comtrol products come with easy-to-use documentation on a CD. For technical assistance, our U.S.-based technical support team is only a phone call away.

Call +1.763.494.4100, or submit your question online at http://www.comtrol.com/support/, or visit our forum at http://forum.comtrol.com/.

Warranty

Comtrol offers a 30-Day satisfaction guarantee and a 2-year limited warranty on all DeviceMaster AIR family products! Extended Warranty Available.